Questions and answers
46 answers about our under-sink reverse osmosis systems, from what the filters do to what happens on installation day. Pick a topic to jump right to it.
The system and what the filters do
8 questions
What does each stage of the filter do?
Stage 1, the sediment filter, catches rust, sand and dirt. Stages 2 and 3, two carbon filters, reduce chlorine, chemicals and bad tastes. Stage 4, the reverse osmosis membrane, reduces dissolved solids like lead, fluoride and salts. Stage 5, a final carbon filter, polishes the taste. Optional stage 6, an alkaline filter, puts minerals like calcium and magnesium back in.
Should I choose the 5-stage or the 6-stage?
Both give you clean, great-tasting water. The 5-stage is the one most of our clients choose. The 6-stage adds an alkaline filter that puts minerals like calcium and magnesium back in and raises the pH. Some people love its taste and some don’t. Tell us what you like and we’ll help you pick.
What does the water taste like?
Clean and neutral, with no chlorine taste. Some people find it light at first.
Does reverse osmosis remove good minerals too?
Yes, it removes most minerals along with the contaminants. According to Health Canada, drinking water is not a major source of calcium. Most of the minerals your body needs come from food. If you’d like minerals in your water, you can add mineral drops or mineral salts yourself, or choose the 6-stage system, which adds minerals back.
Is reverse osmosis water safe to drink every day?
Yes. Many bottled water brands use the same process. Most of the minerals your body needs come from food. If you’d like minerals in your water, you can add them yourself with mineral drops or mineral salts of your choice, or choose the 6-stage, which adds them back.
How is this different from a pitcher or fridge filter?
Pitcher and fridge filters are mostly carbon: they improve taste and reduce chlorine. Reverse osmosis adds a membrane that also reduces dissolved metals, salts and much, much more.
Does it need electricity?
No. It runs on your home’s water pressure, with nothing to plug in, so it keeps working during a power outage.
How long does the system last?
Many years when the filters are changed every year. Parts like the storage tank or faucet can be replaced if they ever need it.
Your water
6 questions
How do I know if my home has lead pipes?
Older homes can still have a lead water service line, especially in Montreal homes built before 1970. Look up your address on the City of Montréal’s lead service line map, and you can ask the City to screen your water. Our systems reduce lead in the water from the filtered faucet.
Is there fluoride in Montreal tap water?
Most Montreal tap water has never had fluoride added. The two West Island plants (Dorval and Pointe-Claire) stopped adding it in 2025. Other cities may differ. Reverse osmosis reduces fluoride, whether it was added or occurs naturally.
Does it reduce microplastics and PFAS?
Reverse osmosis membranes are among the most effective home filters for microplastics and PFAS (“forever chemicals”). Results vary by membrane and by the type of chemical, which is one reason we replace the membrane every year.
Can bacteria get through the system? What about boil-water advisories?
The reverse osmosis membrane blocks most bacteria, but some can still get through the seals and fittings, or grow in the storage tank. That’s why a home system isn’t a way to make unsafe water safe. Our systems are made for city water, which is already treated.
If you know about an advisory ahead of time, for example because of planned work on the water mains, close the system’s water valve before it starts. The tags under your sink show which one. During an advisory, follow your city’s instructions for all your water, including the filtered faucet.
Once it’s lifted, the safest choice is to have us change the filters and disinfect the storage tank. Your carbon filters remove the city’s chlorine before it reaches the tank, so the chlorine won’t clean the system on its own.
Does it filter the water for my whole house?
No. It filters the water that comes out of its own faucet at your kitchen sink, which is the water you drink and cook with. On city water, a whole-house system usually isn’t needed.
Does it work with well water?
Our systems are designed for city (municipal) water. Well water is a different situation that we look at case by case, so give us a call to talk about your home.
Installation
11 questions
How long does installation take?
Usually 1 to 1.5 hours. Your system is put together, flushed and pressure tested before the visit, then tested again under your sink before we leave.
Will it fit under my sink?
Almost always. The filters are compact. If space is tight, the system can go in a nearby cabinet or in the basement, with a line run up to your faucet.
Does the filtered water come out of my regular tap?
No. Filtered water comes from its own faucet, installed at your sink. Your regular tap works exactly as before.
Do you need to drill any holes?
Usually two small ones: a hole for the new faucet in your sink or countertop (unless there’s already a spare hole, like an unused soap dispenser), and a 1/4-inch hole in the drain pipe for the drain line. If you ever remove the system, both are easy to cap.
Can you install it somewhere other than the kitchen?
Yes, for example in a basement or a garage, as long as there’s a water line and a drain nearby. We confirm the price by phone for any non-standard install.
Can you connect my fridge too?
Yes. With your installation, connecting your fridge’s water line is an add-on of up to $200, depending on whether you already have a connection. Just mention it when you call and we’ll set it up to match your needs.
Can you connect my water cooler or ice maker?
Yes. We can connect your fridge’s water and ice dispenser, or add a line to fill bottles for your water cooler. Mention it when you call.
How do I get a quote?
The quote is free and done by phone. A photo of the space under your sink helps us see your setup. We always find a way to make the system fit, and we bring every part on installation day.
I rent my apartment. Can I still get a system?
Yes. Just check with your landlord first, like any change to an apartment. Most landlords are happy to see good water in their units. When we install, we take it that you have their permission.
I live in a condo. Can I get a system?
Yes. Check with your condo board or building management first, since some buildings have rules about changes to plumbing.
What do I do after the installation?
We flush the filters before your visit. After we leave, let the tank fill for about 3 hours, empty it from the filtered faucet, then fill and empty it once more. As with any new water connection, take a quick look under the sink now and then for the first few hours to make sure everything stays dry.
Filter changes and maintenance
7 questions
How often do the filters need changing?
Roughly once a year. We call you when it’s due. If your visit ends up a few weeks late, don’t worry: the filters keep working a little past their date, and the membrane lasts even longer.
Can I test my water myself?
Yes, with an inexpensive TDS meter. Water from the filtered faucet usually reads under about 20 ppm. The 6-stage reads higher because it adds minerals back. A TDS meter doesn’t measure every contaminant, but it’s a quick check.
How do I know the filters are still working?
The yearly change keeps them working well. Signs it’s time: the faucet flows much slower, the taste changes, or a TDS meter reading climbs. Call us and we’ll take a look.
Do I need to be home for the filter change?
Someone needs to be home to let us in, but it doesn’t have to be you. A visit can take up to 1.5 hours, and someone should stay home for about 3 hours after we leave, checking under the sink now and then to make sure everything stays dry. If you pay for each filter change (not the monthly plan), payment is made at the visit.
What if someone at home is sick on the day of the visit?
Let us know at least 48 hours before and we’ll reschedule for free. With less notice there’s a $100 late-notice fee, because your filters are prepared the day before and can’t be reused.
What should I do if I’m going away?
Before you leave, you can close the system’s water valve (the tags under your sink show which one). When you’re back, open it, empty the tank by running the filtered faucet until it slows to a trickle, and let it refill. If you’ve been away a month or more, call us: it may be best to change the filters and disinfect the tank.
Can you help with a system you didn’t install?
Yes, we can help. In many cases we just change the filters and keep your tank and faucet. Send us a photo of your system and we’ll tell you what it needs.
Pricing and payment
5 questions
Is the yearly filter change included in the monthly plan?
Yes. On the monthly plan, your first filter change at about 12 months is included. After the 24 months, the system and installation are paid off: you can keep paying the same $35 a month and your filter change stays covered every year, or stop the monthly payment and pay for each yearly change.
How do I pay?
Buying outright: you pay on installation day. Monthly plan: installation is paid by e-transfer, then your monthly payments are charged automatically to your credit or debit card through PayPal. You don’t need a PayPal account.
Can I pay off the monthly plan early?
Yes. You pay the remaining balance for the system and installation, minus what you’ve already paid, and the system is yours. We’ll give you the exact amount by phone.
Do you offer any discounts?
Ask us when you call.
What if I move?
We can move your system to your new home. It’s $250 when we remove it and reinstall it on the same day, in one trip, within 20 km. Each extra kilometre is $0.75.
Living with your system
9 questions
Will the filtered faucet flow as fast as my regular tap?
It flows a little slower, because the water comes from a pressurized storage tank instead of straight from the line. We set the tank pressure so it still fills a glass or a pot comfortably.
How much filtered water will I have?
The system can make up to 50 gallons a day. The storage tank keeps about 2 gallons ready to pour, and refills in about 2 to 3 hours when it’s empty (a little longer in winter, when the water is colder). If your family uses more, we can install a larger storage tank (extra cost, not included in our prices).
Is the filtered water cold?
It comes out at room temperature from the storage tank, and often colder in winter. For cold water any time, we can connect the system to your fridge or water cooler.
Does it waste water?
A little. It’s the trade-off for very pure water: some water goes down the drain, carrying away what the membrane holds back. It only happens while the tank is filling, and a valve stops it when the tank is full.
Is it noisy?
It’s almost silent. You may hear a soft trickle in the drain while the tank fills, and it stops when the tank is full.
Does it change the water from my other taps?
No. Only the filtered faucet is affected. Your kitchen tap, shower and other taps work exactly as before.
Will it cut down on scale in my kettle?
Yes. Filtered water has very few minerals left, so much less scale builds up.
What happens if there’s a leak?
Every install has a leak detector that shuts off the water to the system, and a leak alarm that sounds when water touches its sensor. Tags on each valve show you how to close the water in seconds.
What if something goes wrong?
Call us. If something’s wrong right after installation, especially anything urgent like a leak, we come back. For small things like low pressure or a change in taste, we’ll usually walk you through the fix by phone or video.
If a problem comes from our system or installation, we fix it. If it’s caused by something else, like household plumbing or damage, a service call is $155, and fees for replacement parts may apply.
Get a free quote
The fastest way is a phone call. You can also leave your number and we’ll call you back.